51
Icon
Description
Login button (*)
The Login button gives qualified staff access to advanced functions, such as modification of the unit's operating
parameters. A Username and corresponding Password are required.
Settings button
Access to system configuration and settings.
Home button
Press this button to return to the main menu from any other screen.
Screen Lock button (*)
By activating it, the main screen is locked, i.e. no button will be operative and no menu will be accessible. The same
button will appear with a closed padlock. To unlock it, press the same button. A password is required.
Help button (*)
Quick help information indicated by screen.
Information button (*)
Internal system information
ECO Mode active icon (*)
This icon is displayed on the UPS power flow diagram, when the UPS is operating in ECO mode (this mode is
activated and the unit is running).
Maintenance bypass icon (*)
This icon is displayed on the UPS power flow diagram when, due to a service intervention, the maintenance bypass
switch (internal, or correctly wired external) has been activated (set to "ON").
Test mode icon
This icon may appear on the top bar of the screen ("System Information"), when qualified staff have configured the
unit in test mode.
Nimbus Services communication
This icon indicates that the Nimbus card is correctly inserted into its slot and is connected to the Internet.
If this icon appears crossed out, it may indicate that the Nimbus card is not present, or there is no Internet access.
Measurements menu
The Measurements menu provides access to the various measurements of the UPS, organised in submenus,
depending on the different parts of the unit.
Alarms menu
A table is accessed showing the alarms that are currently active. When a new alarm appears, pending viewing, the
bell icon flashes red and the acoustic alarm sounds (intermittently). Once active alarms have been acknowledged,
the red appears continuously and the acoustic alarm stops. If there are no alarms, the red disappears.
This menu also provides access to the Alarms Log submenu and the button for muting the acoustic alarm.
Status and Control menu
The current status of the UPS is displayed, and the operating mode can also be changed.
Nominal Values menu
The main nominal values of the unit are displayed. Depending on the user role (password-protected access), some
of them can be modified.
Graphics menu
Graphical representation of relevant UPS measurements, such as voltages and currents.
Advanced menu
Access restricted to qualified staff (password-protected). Advanced configuration parameters.
(*) Note: these buttons and their functions are only accessible from the
main or home screen, and not from the other screens.
Tabla 3.
Icons and buttons that are accessible from any
control panel screen.
SLC CUBE4
- UNINTERRUPTIBLE POWER SUPPLY SYSTEM
-
USER MANUAL