29
5
Fig. 26.
Lowering the equipment from the pallet.
6
Fig. 27.
Example of an unpacked unit.
The steps required for unpacking are:
1
To unpack the equipment, cut the strips of the cardboard
enclosure and remove it from above as if it were a cover (
) or disassemble it with the necessary tools if the enclosure
is made of wood.
2
Remove the corner pieces and the plastic cover (
).
3
Unscrew the guides on both sides of the base of the equip-
ment provided in order to facilitate the descent of the equip-
ment (
4
Assemble the guides on the pallet as shown in
5
Proceed to lower the equipment from the pallet (
).
6
Equipment unpacked in its final location (
).
5.1.3.2. 50-80 kVA equipments.
In
are shown, by way of example, the illustra-
tions corresponding to the unpacking of the UPS cabinet from
50 kVA to 80 kVA.
1
Fig. 28.
Removing the cardboard packaging.
2
Fig. 29.
Removal of the corner pieces and plastic cover.
SLC CUBE4
- UNINTERRUPTIBLE POWER SUPPLY SYSTEM
-
USER MANUAL
