50
SALICRU
7. CONTROL PANEL
The unit's control panel, totally integrated in a 5” touchscreen,
includes monitoring, indication, control and adjustment func-
tions, etc.
The organisation of the information and functions on this
screen, as you will see in detail in this section, is divided into 4
basic display areas:
1
System information.
2
Main display area.
3
Submenus or related functions.
4
Main menu.
1
2
3
4
Fig. 67.
Distribution of information on a generic screen.
The information and contents in areas
2
and
3
will be dis-
tinct and particular to each screen. However, access to the
main menu (area
4
) in its entirety, and the system information
(in area
1
), with certain specificities, will always be acces-
sible from any screen.
The buttons and icons in areas
1
and
4
, which are always
visible, are described in the table below.
7.1. MAIN OR HOME SCREEN
The main screen will appear by default after the UPS starts up.
It is the starting point from where you can access all submenus,
functions and settings. With regards to the generic screen de-
scribed in
, the information on this screen also presents 4
areas, but with certain specificities (see
. In the display
area, the UPS power flow is shown, and in the submenus area,
the UPS output load is shown at all times:
1
System Information (with 3 additional buttons).
2
Power Flow or Synoptic, Voltages, Date and Time.
3
Output load.
4
Main menu.