57
7.12. SYSTEM EVENTS
As a complement to the system alarms, the unit's "Log" (ac-
cessible via the control panel or via monitoring software) is
capable of recording events that do not involve any type of
alarm (see
7.3
). These events will therefore only be shown
when accessing the "Log" submenu, and never in the "Alarms"
submenu. They will also not trigger an acoustic or visual alarm,
just a record of the log file, with a time capture (and a capture
of other internal parameters, visible in monitoring software).
Tab. 12
shows the possible text messages of events (not
alarms) in the Log, and their brief descriptions.
MESSAGE ON-SCREEN (Log)
DESCRIPTION
UPS Start
The UPS start-up control command has been sent.
UPS Stop
The UPS stop control command has been sent.
UPS on Inverter
The UPS is in normal mode, output in inverter.
UPS ECO-mode Activation
Activation of UPS ECO mode.
UPS ECO-mode in Bypass
The UPS is in ECO mode, output in bypass.
UPS ECO-mode in Inverter
The UPS is in ECO mode, output in inverter.
UPS on back-up mode
UPS in autonomy or battery mode.
UPS Charging Batteries
UPS charging batteries.
Inv Out Current Limit
Output current limit activated in inverter.
Batteries floating
Batteries at float voltage level.
Battery Boost Charge
The charger is on quick battery charging ("boost"), above float.
UPS on Battery Test
UPS carrying out a battery test.
Battery Test N.A.
It is not possible to have it carry out a battery test.
UPS with Any Alarm
UPS with an active alarm.
Alarms Ack pending
Alarms pending acknowledgement.
Parallel connect. at Out
UPS in parallel connected to the output.
UPS Powered Up
Capture of the moment when power is supplied to the UPS (from complete shutdown).
Chg on idle-mode
Charger operating with no load to increase efficiency.
No Input Voltage
There is no Input voltage.
No Battery Voltage
There is no battery voltage.
No Bus Voltage
There is no DC bus voltage.
Any SCR Active
An input thyristor is active.
Tab. 12.
Log event messages on-screen, and their descrip-
tions.
SLC CUBE4
- UNINTERRUPTIBLE POWER SUPPLY SYSTEM
-
USER MANUAL
Summary of Contents for SLC CUBE4
