- 39 -
3.-
AVIS DE SÉCURITÉ
.
Le produit
ASI
décrit dans ce manuel d’utilisation a été conçu, fabriqué et commercialisé conformément à la norme
UNE-EN-ISO 9001
d’assurance de la qualité. L’estampillage
CE
indique sa conformité aux directives de la CEE par
l’application des normes harmonisées suivantes:
•
UNE-EN 62040-1-1 + CORR: 2004
. Systèmes d’alimentation sans interruption
(ASI)
Partie 1-1: conditions générales et de
sécurité pour les
ASI
utilisés dans des zones accessibles aux opérateurs.
•
UNE-EN 50091-2:97 + CORR: 1999
. Système d’alimentation sans interruption
(ASI)
Partie 2: prescriptions pour la com-
patibilité électromagnétique (CEM, classe A).
AVERTISSEMENT:
il s’agit d’un produit de classe A. L’usage domestique de ce produit peut provoquer des perturbations radio-
électriques, auquel cas il pourra être demandé à l’utilisateur de prendre des mesures complémentaires.
3.1.-
À prendre en considération.
• Tenir compte des «Avis de sécurité» est une obligation qui incombe légalement à l’utilisateur. Veuillez les lire attentivement et
suivez les étapes indiquées dans l’ordre établi.
Les normes électriques locales et diverses restrictions dans les locaux du client peuvent invalider certaines recommandations
de ce manuel. En cas de différends, l’utilisateur appliquera la plus exigeante.
Les instructions et les illustrations de ce manuel sont génériques pour toute la série et servent de référence. Si votre modèle
n’est pas équipé de certains éléments décrits, omettez toute mention à leur sujet et poursuivez. Sachez également que
l’appareil vous est livré correctement identifié par sérigraphie ou étiquetage, veuillez y prêter attention.
• Il faudra recharger les batteries de l’appareil tous les 6 mois pendant au moins 8 heures pour éviter, autant que possible, leur
dégradation irréversible. En outre, si l’appareil doit être entreposé, il faudra le laisser dans un lieu frais et sec,
jamais à
l’intempérie
.
• Ne l’installez pas dans des atmosphères corrosives, pulvérulentes et jamais à l’intempérie. Évitez la lumière solaire directe.
• Cet appareil ne sera jamais placé dans des atmosphères inflammables ou explosives.
• L’emplacement sera aéré, éloigné de toute source de chaleur et facilement accessible. Laissez un espace libre d’au moins
25 cm tout autour de l’appareil pour que l’air de ventilation puisse circuler.
Ne bouchez pas les grilles de ventilation, n’introduisez aucun objet dans les orifices.
Il est impératif de ne jamais dépasser la fourchette de température et d’humidité définie dans les caractéristiques de l’appareil.
• Ne posez rien sur l’appareil, ni devant de sorte à ne pas masquer la façade.
• Placez l’appareil le plus près possible de la prise de courant et des charges à alimenter.
• Ne nettoyez pas les appareils avec des produits abrasifs, corrosifs, liquides ou détergents. Pour les nettoyer, utilisez un linge
humide, puis essuyez. Évitez les éclaboussures ou les déversements de produits qui pourraient couler dans les rainures ou les
grilles de ventilation.
• Pour éviter le déchargement complet des batteries et comme mesure de sécurité après une coupure prolongée du réseau
commercial, en fin de journée, éteignez les charges d’abord, puis l’appareil en suivant les instructions du «Manuel d’instructions».
• Si vous devez changer un fusible, utilisez un modèle de même calibre, type et taille.
Summary of Contents for SLC Link Series
