5
2. SAFETY INFORMATION.
2.1. USING THIS MANUAL.
The documentation of any standard equipment is available to the
customer on our website for download
(www.salicru.com)
.
The operation of the device described in this document is
based on the original factory settings and configuration. Sec-
tion 7.3 shows the screens tree, the variables and the original con-
figuration. Take into consideration that any modification of them can
lead to changes in the behaviour of the device.
•
For devices ‘powered by socket,’ this is the website for obtaining
the user manual and
‘Safety Instructions’
EK266*08.
•
For devices with ‘permanent connection’ via terminals, a CD-
ROM or pen drive containing all necessary information for con-
nection and startup, including
‘Safety Instructions’
EK266*08,
may be supplied with it.
Before carrying out any action on the device relating to its installa-
tion or startup, change of location, configuration or handling of any
kind, carefully read the safety instructions.
The purpose of the user manual is to provide information regarding
safety and explanations of the procedures for installation and opera-
tion of the equipment. Read it carefully and follow the steps indi-
cated in the order established.
Compliance with the ‘Safety Instructions’ is obliga-
tory and the user is legally responsible
for compliance
and enforcement.
The device is delivered properly labelled for correct identification of
each of its parts, which, together with the instructions described in
this user manual, allows installation and startup operations to be
performed in a simple and organised manner without any doubts
whatsoever.
Finally, once the equipment is installed and operating, it is recom-
mended to save the documentation downloaded from the website,
CD-ROM or Pen Drive in a safe and easy-to-access place, for any
future queries or doubts that may arise.
The following terms are used interchangeably in the document to
refer to:
•
‘SLC TWIN PRO2 A,’ ‘TWIN PRO2 A,’ ‘TWIN A,’ ‘PRO2 A,’
‘device,’ ‘unit’ and ‘UPS’
- Uninterruptible power supply.
Depending on the context of the phrase, it can refer either to the
actual UPS itself or to the UPS and the batteries, regardless of
whether it is all assembled in the same cabinet or not.
•
‘Batteries’ or ‘accumulators’
.- Group or set of elements that
stores the flow of electrons by electrochemical means.
•
‘
TSS
’ - Technical Service and Support.
•
‘
Customer,’ ‘installer,’ ‘operator’ or ‘user’
- These are used
interchangeably and by extension to refer to the installer and/
or operator who will carry out the corresponding actions, and
the same person may be responsible for carrying out the respec-
tive actions when acting on behalf, or in representation, of the
above.
2.1.1. Conventions and symbols used.
Some symbols may be used and appear on the device, batteries
and/or in the context of the user manual.
For more information, see section 1.1.1 of document EK266*08 on
‘Safety instructions’
.
SLC TWIN PRO2
UNINTERRUPTIBLE POWER SUPPLY (UPS)
USER MANUAL
