6
SALICRU
3. QUALITY ASSURANCE AND STANDARDS.
3.1. STATEMENT BY THE MANAGEMENT.
Our goal is customer satisfaction, therefore this Management has
decided to establish a Quality and Environment Policy, through
the implementation of a Quality and Environmental Management
System that will enable us to comply with the requirements de-
manded in the
ISO 9001
and
ISO 14001
and also by our Customers
and Stakeholders.
Likewise, the management of the company is committed to the de-
velopment and improvement of the Quality and Environmental Man-
agement System, through:
•
Communication to the entire company of the importance of sat-
isfying both the customer's requirements as well as legal and
regulatory requirements.
•
The dissemination of the Quality and Environment Policy and the
setting of the Quality and Environment objectives.
•
Conducting reviews by the Management.
•
Providing the necessary resources.
3.2. STANDARDS.
This product is designed, manufactured and sold in accordance with
Quality Management Standard
EN ISO 9001
.
The
marking indicates conformity with EC Directives:
•
2014/35/EU
. - Low voltage safety.
•
2014/30/EU
. - Electromagnetic compatibility [EMC].
•
2011/65/EU
. - Restriction of the use of hazardous substances in
electrical and electronic equipment [RoHS].
In accordance with the specifications of the harmonised standards:
•
EN-IEC 62040-1
. Uninterruptible power supplies [UPS]. Part
1-1: General and safety requirements.
•
EN-IEC 62040-2
. Uninterruptible power supplies [UPS]. Part 2:
Electromagnetic compatibility requirements [EMC].
WARNING!
SLC TWIN PRO2 A 1, 2 and 3kVA
. This is a category
C2 UPS. In a residential environment, this product may cause
radio interference, in which case the user must take additional
measures.
It is not appropriate to use this device with basic life support
applications, where a failure of the former can render vital
equipment out of service or significantly affect its safety
or effectiveness. It is also not recommended in medical
applications, commercial transport, nuclear installations, or
other applications or loads, where a failure of the product can
lead to personal or material damages.
The EC declaration of conformity of the product is
available to the customer upon express request to our
offices.
And
UL, CSA and FCC
, according to the specifications of the standards:
•
UL 1778
•
CSA C22.2 NO.107.3.-14
•
FCC part 15 Subpart B
ELECTROMAGNETIC COMPATIBILITY WARNING (FCC):
•
SLC-1000-TWIN PRO2 A
. This equipment has been tested and
found to comply with the limits for a Class B digital device, pur-
suant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
–
Reorient or relocate the receiving antenna.
–
Increase the separation between the equipment and receiver.
–
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
–
Ask the dealer or an experienced radio / TV technician
for help.
•
SLC-2000-TWIN PRO2 A
and
SLC-3000 TWIN PRO2 A
. This
equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commer-
cial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to
radio communications. Op of this equipment in a residen-
tial area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
The manufacturer is not liable in the event of modification or
intervention on the device by the user.
BATTERIES WARNING (UL):
•
Servicing of batteries should be performed or supervised by personnel
knowledgeable about batteries and the required precautions.
•
Batteries should not be replaced by the operator or user.
•
When replacing batteries, replace with the same type and
number of batteries or battery packs.
•
Caution
: Do not dispose of batteries in fire. The bat-
teries may explode.
•
Caution:
Do not open or mutilate batteries. Released
electrolyte is harmful to the skin and eyes. It may be toxic.
•
Caution:
A battery can present a risk of electrical shock
and high short-circuit current. The following precautions
should be observed when working on batteries:
a.
Remove watches, rings, or other metal objects.
b.
Use tools with insulated handles.
c.
Wear rubber gloves and boots.
d.
Do not lay tools or metal parts on top of batteries.
e.
Disconnect charging source prior to connecting or discon-
necting battery terminals.
