2
SALICRU
General index
1. INTRODUCTION.
1.1. THANK YOU LETTER.
2. SAFETY INFORMATION.
2.1. USING THIS MANUAL.
2.1.1. Conventions and symbols used.
3. QUALITY ASSURANCE AND STANDARDS.
3.1. STATEMENT BY THE MANAGEMENT.
3.2. STANDARDS.
3.3. ENVIRONMENT.
4. PRESENTATION.
4.1. VIEWS.
4.1.1. Views of the device.
4.2. DEFINITION OF THE PRODUCT.
4.2.1. Nomenclature.
4.3. OPERATING PRINCIPLE.
4.3.1. Notable features.
4.4. OPTIONAL EXTRAS.
4.4.1. Exterior manual maintenance bypass.
4.4.2. Communication card.
4.4.2.1. Integration into computer networks using an SNMP
adapter.
4.4.2.2. RS-485 modbus.
4.4.2.3. Relay interface.
5. INSTALLATION.
5.1. RECEPTION OF THE DEVICE.
5.1.1. Reception, unpacking and contents.
5.1.2. Storage.
5.1.3. Unpacking.
5.1.4. Transport to the site.
5.1.5. Siting, immobilising and considerations.
5.1.5.1. Siting for single devices.
5.1.5.2. Siting for parallel systems.
5.1.5.3. Immobilising the device.
5.1.5.4. Preliminary considerations before connection.
5.1.5.5. Preliminary considerations before connection,
regarding the batteries and their protections.
5.1.5.6. Connection elements.
5.2. CONNECTIONS.
5.2.1. Connection of the input terminals to the AC mains.
5.2.2. Connection of the load or loads to the output terminals.
5.2.2.1. Output configurations depending on the connection of
the secondary windings of the isolation transformer.
5.2.3. Connection to the external batteries and backup
extension.
5.2.4. Connection of the earth bonding terminal
.
5.2.5. Terminals for EPO (emergency power off).
5.2.6. Parallel connection.
5.2.6.1. Introduction in redundancy.
5.2.6.2. Installation and parallel operation.
5.2.7. RS-232 and USB communications port
5.2.8. Smart slot for the integration of an electronic
communication unit.
5.2.9. Software.
5.2.10. Considerations before startup with connected loads.
6. OPERATION.
6.1. STARTUP.
6.1.1. Checks before startup.
6.2. UPS STARTUP AND SHUTDOWN.
6.2.1. UPS startup with mains voltage.
6.2.2. UPS startup without mains voltage.
6.2.3. UPS shutdown with mains voltage.
6.2.4. UPS shutdown without mains voltage.
6.3. MANUAL BYPASS SWITCH (MAINTENANCE).
6.3.1. Transfer to maintenance bypass.
6.3.2. Transfer to normal operation.
6.4. OPERATING PROCEDURE FOR A PARALLEL SYSTEM.
6.5. HOW TO INTEGRATE A NEW UPS INTO AN
OPERATIONAL PARALLEL SYSTEM, OR A UPS IN
SINGLE MODE.
6.6. HOW TO REPLACE A FAULTY UPS IN AN OPERATIONAL
PARALLEL SYSTEM.
