31
–
NCF. Sets the UPS to normal mode [not CF mode].
With this option activated, the output frequency is
set at 50 or 60 Hz synchronised with the input fre-
quency based on the parameter 2 selection and its
range.
If the parameter 2 selection is 50 or 60 Hz, it will be
transferred to battery mode (powering loads) when
the frequency is not respectively between 46 and
54 Hz or 56 and 64 Hz.
Fig. 27.
(*)
If ATO is selected in parameter 2, parameter 3
will display the current frequency.
•
Code 03
Reserved.
Fig. 28.
Reserved for future options.
•
Code 04
Reserved.
Fig. 29.
Reserved for future options.
•
Code 05
ECO mode, enable/disable.
Fig. 30.
Parameter 3 setting: Activates or deactivates the ECO
function.
–
DIS. ECO function disabled.
–
ENA. ECO function enabled.
If the ECO function is disabled, the voltage and fre-
quency range for ECO mode can be adjusted, but there
is no point unless the function itself is enabled.
•
Code 06
Reserved.
Fig. 31.
Reserved for future options.
•
Code 07
Reserved.
Fig. 32.
Reserved for future options.
•
Code 08
Bypass mode setting.
Fig. 33.
SLC TWIN PRO2 T
UL
UNINTERRUPTIBLE POWER SUPPLIES (UPS)
USER MANUAL
