19
SALICRU
"A"
"A"
"B"
Fig. 7.
Vertical -tower type- assembling.
4.2.5.4. Vertical -tower type- assembling, with
extended back up time (battery module).
Ŗ
The description of this section is based on an equipment
with only one battery module (see figure 8). For a higher
quantity of modules proceed to the connection among them.
Ŗ
Rotate the control panel of the equipment according to sec-
tion 4.2.5.1.
Ŗ
In equipments up to kVA, take the 4 plastic pieces "A" with
angle shape and supplied with the UPS and the two sup-
plied with the battery module "B", and joint them till obtain two
supports or stabilizers "C" to hold the equipment and battery
module.
Ŗ
For equipments up to 3 kVA.
Put the UPS and battery module on vertical position be-
tween the stabilizers supports "C".
Fix the "D" metallic piece that joint UPS and battery
module by means of the supplied screws "E".
For equipments of higher power.
Put the equipment and battery module in vertical position
and together. Next fix the two metallic supports by means
of the supplied screws, one on the side of the equipment
and other one on the side of the battery module, in the
UPS 4 to 6 kVA.
For equipment of 8 to 10 kVA, put the equipment vertical.
There are not supports or stabilizers.
Fix the joint metallic piece between the UPS and battery
module by means of the supplied screws.
"A"
"A"
"B"
"C"
"D"
"E"
