background image

5

2. SAFETY INFORMATION.

2.1.  USING THIS MANUAL.

The documentation of any standard equipment is available to 
the customer on our website for download 

(www.salicru.

com)

.

 

t

For devices “powered by socket”, this is the website for
obtaining the user manual and 

“Safety Instructions”

EK266*08.

 

t

For devices with “permanent connection” via terminals, a
CD-ROM or pen drive containing all necessary information
for connection and start-up, including 

“Safety Instruc-

tions”

 EK266*08, may be supplied with it.

Before carrying out any action on the device relating to its 
installation or start-up, change of location, configuration or 
handling of any kind, carefully read the safety instructions.
The purpose of the user manual is to provide information 
regarding safety and explanations of the procedures for 
installation and operation of the equipment. Read them carefully 
and follow the steps indicated in the order established.

 

Compliance with the "Safety Instructions" is 
mandatory and the user is legally responsible

 for 

compliance and enforcement.

The equipment is delivered properly labelled for the correct 
identification of each of the parts, which together with the 
instructions described in this user manual allows the operations 
of installation and commissioning to be performed in a simple 
and orderly manner without having any doubts whatsoever.
Finally, once the equipment is installed and operating, it is 
recommended to save the documentation downloaded from the 
website, CD-ROM or Pen Drive in a safe and easy-to-access 
place, for any future queries or doubts that may arise.
The following terms are used interchangeably in the document 
to refer to:

 

t

«SPS ADVANCE RT2, ADVANCE RT2, ADV RT2, RT2,
equipment, unit or UPS»

.- Uninterruptible power supply

system.
Depending on the context of the phrase, it can refer either
to the actual UPS itself or to the the UPS and the batteries,
regardless of whether it is all assembled in the same metal
casing - box - or not.

 

t

“Batteries or accumulators”

.- Group or set of elements

that stores the flow of electrons by electrochemical means.

 

t

T.S.S.

’ - Technical Service and Support.

 

t

Client, installer, operator or user’

  - These are used

interchangeably and by extension to refer to the installer
and/or operator who will carry out the corresponding
actions, and the same person may be responsible for
carrying out the respective actions when acting on behalf
of, or in representation of, same.

2.1.1.  Conventions and symbols used.

Some symbols may be used and appear on the equipment, 
batteries and/or in the context of the user manual.
For more information, see section 1.1.1 of document EK266*08 
on 

"Safety instructions"

.

SPS.ADVANCE RT2

 UNINTERRUPTIBLE POWER SUPPLY (UPS)

USER'S MANUAL        

YOUR CONNECTION TO SAFETY

Thiele KG 

• V
orderer W

einberg 26 • D-71522 Backnang • T

el.: +49 (0)7191 3560-0 

• Fax.: +49 (0)7191 3560-19 

• info@thiele-kg.de 

• www

.thiele-kg.de

Thiele KG 

• V

orderer W

einberg 26 • D-71522 Backnang • T

el.: +49 (0)7191 3560-0 

• Fax.: +49 (0)7191 3560-19 

• info@thiele-kg.de 

• www

.thiele-kg.de

YOUR CONNECTION TO SAFETY

klick to

www

u-s-v

YOUR CONNECTION TO SAFETY

klick to

www

ACDC-DCDC

YOUR CONNECTION TO SAFETY

klick to

www

SYSTEME

YOUR CONNECTION TO SAFETY

klick to

www

CONTACT

YOUR CONNECTION TO SAFETY

klick to

www

CALLBACK

Summary of Contents for SPS.ADVANCE RT2
































Reviews: