background image

5

2.  SAfETY INfORMATION.

2.1.  using This manual.

The documentation of any standard equipment is available to 

the customer on our website for download:

(www.salicru.com)

.

 

for devices “powered by socket”, this is the website for 

obtaining the user manual and 

“Safety Instructions”

 

ek266*08.

 

for devices with “permanent connection” via terminals, a 

Cd-Rom or pen drive containing all necessary information 

for connection and commissioning, including 

“Safety In-

structions”

 ek266*08, may be supplied with it.

before carrying out any action on the equipment relating to its 

installation or commissioning, change of location, configuration 

or manipulation of any kind, you must read the safety instruc-

tions carefully.

The purpose of the user manual is to provide information re-

garding safety and explanations of the procedures for installa-

tion and operation of the equipment. Read them carefully and 

follow the steps indicated in the order established.

 

compliance with the "Safety Instructions" is 

mandatory and the user is legally responsible

 for 

compliance and enforcement.

The equipment is delivered properly labelled for the correct 

identification of each of the parts, which together with the in-

structions described in this user manual allows the operations 

of installation and commissioning to be performed in a simple 

and orderly manner without having any doubts whatsoever.

finally, once the equipment is installed and operating, it is rec-

ommended to save the documentation downloaded from the 

website, Cd-Rom or Pen drive in a safe and easy-to-access 

place, for any future queries or doubts that may arise.

The following terms are used interchangeably in the document 

to refer to:

 

‘SPS HOME, SPS, device, unit or UPS’

 - Uninterruptible 

power supply.

depending on the context of the phrase, it can refer either 

to the actual UPS itself or to the UPS and the batteries, 

regardless of whether it is all contained in the same en-

closure.

 

‘Battery or accumulator’

 - element that stores the flow 

of electrons by electrochemical means.

 

TSS

’ - Technical Service and Support.

 

client, installer, operator or user’

  - These are used 

interchangeably and by extension to refer to the installer 

and/or operator who will carry out the corresponding ac-

tions, and the same person may be responsible for carrying 

out the respective actions when acting on behalf of, or in 

representation of, same.

SPS HOME

 UnInTeRRUPTIbLe PoweR SUPPLy (UPS)

USER'S MANUAL        

Summary of Contents for SPS.HOME













Reviews: