6
SALICRU
3. QUALITY ASSURANcE ANd STANdARdS.
3.1. sTaTemenT by The managemenT.
our goal is customer satisfaction, therefore this management
has decided to establish a Quality and environment Policy,
through the implementation of a Quality and environmental
management System that will enable us to comply with the
requirements demanded in the
ISO 9001
and
ISO 14001
and
also by our Customers and Stakeholders.
Likewise, the management of the company is committed to
the development and improvement of the Quality and environ-
mental management System, through:
•
Communication to the entire company of the importance of
satisfying both the client's requirements as well as legal
and regulatory requirements.
•
The dissemination of the Quality and environment Policy
and the setting of the Quality and environment objectives.
•
Conducting reviews by the management.
•
Providing the necessary resources.
3.2. sTandards.
SPS home is designed, manufactured and sold in accordance
with Quality management Standard
EN ISO 9001
. The mark
indicates conformity to the eeC directives through the ap-
plication of the following standards:
•
2014/35/EU
. - Low voltage safety.
•
2014/30/EU
. - electromagnetic Compatibility (emC).
•
2011/65/EU
. - Restriction of the use of hazardous sub-
stances in electrical and electronic equipment (RohS).
According to the specifications of the harmonized standards.
Reference standards:
•
EN-IEc 62040-1
. Uninterruptible power supplies (UPS).
Part 1-1: general and safety requirements for UPS used in
user access areas.
•
EN-IEc 60950-1
. Information technology equipment.
Safety. Part 1: general requirements.
•
EN-IEc 62040-2
. Uninterruptible power supplies (UPS).
Part 2: emC requirements.
The manufacturer accepts no liability in the event of
modification of or intervention on the device by the
user.
WARNING!:
The SPS.home is a category C1 UPS.
It is not appropriate to use this device with basic life
support applications, where a failure of the former can
render vital equipment out of service or significantly
affect its safety or effectiveness. It is also not recom-
mended in medical applications, commercial transport,
nuclear installations, or other applications or loads,
where a failure of the product can lead to personal or
material damages.
The eC declaration of conformity of the product is avail-
able to the customer upon express request to our head-
quarters.
3.3. environmenT.
This product has been designed to respect the environment and
manufactured according to
ISO 14001
.
Recycling of the equipment at the end of its useful life:
our company undertakes to use the services of authorized and
regulatory companies to treat the set of products recovered at
the end of their useful life (contact your distributor).
Packaging:
for the recycling of the packaging there must be compliance
with the legal requirements in force, according to the specific
regulations of the country where the equipment is installed.
Batteries:
batteries pose a serious danger to health and the environment.
The disposal of them shall be carried out in accordance with
the laws in force.
