32
33
EN
4.3 Product overview
Push handle and
armrest made of cork
with red reflector
Brake handle with
cork grip surface
Handlebar for height
adjustment of the handles
Brown hook for locking in folded state
Front and rear tabs
to attach the lamp
Front fork with reflector
Inner strap fastened in
net bag with fastening
hook e.g. for key ring
Large off-road front
wheels with reflective
rims for better visibility
in the dark
Brown release strap for folding the rollator
Hand screw for locking
of the handlebar with
red reflector
Side reflector
seat net
Cross brace with
snap-in mechanism
Brake – convertible
to a one-handed
simultaneous brake
Figure 1: The Saljol Aluminium Rollator
rubberised curb aid
with red reflector
5. Operation
Inventory
Take the Saljol Aluminium Rollator out of the box and check if anything is missing.
Compare with figure 1 on page 32 and with the scope of delivery, described in 4.1 on
page 30. If any part is missing or damaged, contact your dealer or Saljol immediately.
5.1 Unfolding the rollator
Open the brown hook
to unlock the folding
mechanism.
Hold both handles and
push or pull them apart
in parallel.
Finally, push both seat
tubes down with your
hands until you hear a
„click“ sound.
Important
Now test whether you can pull the seat tubes upwards. If this does not
work, the rollator is correctly and safely unfolded. If in doubt, compare
with figure 1 on page 32. After unfolding the rollator, please make sure
that it is securely closed by an audible click of the lock and that the seat
is well tensioned. Make sure that both push handles are securely inserted
in the frame and firmly fixed with the hand screw.
Always test the secure fit of all accessories BEFORE use. Failure to
observe these warnings may result in injury.
Cane holder for walking stick and crutch
Net bag removable with one hand
Seat tube with carrying handle
Bowden cable
