34
10.3 Maintenance table
Date
Task
Note
Before each use
Function test of the brake
system.
Operate the brake up to
the stop. The braked wheels
must no longer turn during
normal use.
Function test of the pressure
brake.
Move the brake lever side-
ways. Tight fit of all screws.
Performing the test by the
user or an assistant. If the
brake is faulty, have it repai
-
red by an authorised spe
-
cialist workshop.
Carry out the test by the
user or an assistent. If there
is too much brake lever play,
have the brake repaired by
an authorised workshop.
Every 4 weeks
(depending on
frequency of use)
Oiling of the movable
components
• Brake lever bearing
Check the screws for
tightness.
Carried out by the user or
an assistant.
Before oiling the compo-
nents, remove any waste oil
residues from them. Remove
excess oil.
Performing the test by the
user or an assistant
Every 6 months
(depending on
frequency of use)
Check:
• Fidinesss
• General condition
• Brakes
• Wooden parts
Please observe the care and
hygiene instructions. In the
event of any defects, please
commission only authorised
specialist workshops with
the necessary repair work,
as only these workshops
have been instructed in the
execution of the necessary
work and usually have suffi
-
ciently trained personnel.
The brakes must be checked
every 6 months by a
specialist dealer.
