50
English
Navigation element
• The arborescence of the menu allows to call the
functions of the converter. A number is attrib-
uted to every menu and submenu.
• The rotation of the encoder allows the scrolling
of a same menu level
(example 4000->5000).
• Any blinking elements (value, menu number,
symbol or icon) allow the choice of a new value,
a new menu number or a new function.
8.1.5 Menu description
List (Fig. 12)
<1.0.0.0>
• To adjust the setting point, turn the encoder. The
display changes to menu <1.0.0.0> and the set-
point begins to blink. The new rotation allows
increasing or decreasing of the value.
• To confirm the change, give an impulse on the
encoder, the display returns to the status page.
<2.0.0.0>
• The operating modes are the « Speed control »,
the « Constant pressure » and the
« P.I.D. control ».
<3.0.0.0>
<4.0.0.0>
• The « Information » menu displays measuring,
device and operating data, see,
(Fig. 13).
<5.0.0.0>
• The « Service » menu allows to get access to the
converter parameter setting.
<6.0.0.0>
• If one or several defects arise, the page of
defects appears.
The letter « E » followed by three digit code
appears (chapter 11).
<7.0.0.0>
• The « Access lock » is available when the switch
2 is in the ON position (chapter 8.5.3).
CAUTION!
Material damage!
Inadequate setting changes can lead to pump
operation defects, which can lead to material
damage on the pump or installation.
• Settings in « SERVICE » mode should only be
made during commissioning and only by skilled
technicians.
Symbol
Description
When the arrow appears:
• An impulse on the encoder allows
the access to the submenu (exam-
ple 4000->4100).
When the arrow « return »” appears:
• An impulse on the encoder allows
the access to the higher menu
(example 4150->4100).
Position
Switch 1
Description
OPERATION
OFF
Adjustment of the setting
point, possible for both
cases.
SERVICE
ON
Position
Switch 1
Description
OPERATION
OFF
Setting ON / OFF of the
pump.
SERVICE
ON
Position
Switch 1
Description
OPERATION
OFF
Only on reading for ope-
rating modes.
SERVICE
ON
Setting for operating
modes.
Position
Switch 1
Description
OPERATION
OFF
Only reading for the
« Information » menu.
SERVICE
ON
Position
Switch 1
Description
OPERATION
OFF
Only reading for the
« Service » menu.
SERVICE
ON
Setting for « Service »
menu.
Position
Switch 1
Description
OPERATION
OFF
Display of the error page.
SERVICE
ON
Position
Switch 1
Description
OPERATION
OFF
Display of « Access lock »
symbol.
SERVICE
ON
POMPES SALMSON 06/2013
Summary of Contents for MULTI-VE Series
