Installation Instruction
Operation Instruction
Please! DO NOT run dry
1.
Turn to open drain plug.
2.
Press On/Off switch to activate timer.
3.
At any time, water drain completely from the basin. Press
On/Off switch to stop or built in two minute timer.
On/Off
Switch
Fastner
1-3/8” Hole
for On/Off Switch
Figure 1
1.
Make a hole ( size 1-3/8”) for the On/Off switch as shown (see fig 1).
Pre-drill required.
2.
Placed a 1/8” clear hose into the rear of the switch and on/off switch into
the hole.
3.
The discharge pump kit is made to fit onto the pedicure unit. (see fig 2)
4.
Connect E-Z connector onto the drain elbow.
5.
Plug discharge pump outlet into the two minute timer outlet
6.
Plug two minute timer into the wall outlet.
7.
It is very important that tip of the clear tub remain above the water Level
with one loop as shown.
** Please cut to fit 1” Flex hose to your size**
Drain Elbow
Discharge
Pump
1/8” clear tubing
Figure 2
Two Minute Timer
1” PVC Pipe
1-1/4" E-Z Connector
1-1/4” Drain Elbow
3/4”x1” adapter
½”Check Valve
Tip of the clear hose
MUST be above the
water level.
Discharge Pump
On/Off
Switch
Fastner
(Provided by MFG)
Power Cord
Air Tubing
Outlet Pluggs
Loop
to connect
Main
Drain
Pedi
