Salora 22FSB5002, Operating Instructions Manual

English

   - 64 -

You can use USB hubs with your TV’s USB inputs. 

External power supplied USB hubs are recommended 

in such a case. 
It is recommended to use the TV’s USB input(s) 

directly, if you are going to connect a USB hard disk.

Note:

 When viewing image files the 

Media Browser

 menu 

can only display 1000 image files stored on the connected 

USB device.

Media Browser Menu

You can play photo, music and movie files stored on a 

USB disk by connecting it to your TV. Connect a USB 

disk to one of the USB inputs located on the side of 

the TV. Pressing the 

Menu

 button while in the 

Media 

Browser

 mode will access the 

Picture

, 

Sound

 and 

Settings

 menu options. Pressing the 

Menu

 button 

again will exit from this screen.

You can set your 

Media

Browser

 preferences by using the 

Settings

 menu.

Loop/Shuffle Mode Operation

Start playback with the 

Play 

button and activate 

All files in the list will be 

continuously played in original 

order

Start playback with the 

OK 

button and activate 

The same file will be played 

continuously (repeat)

Start playback with the 

Play

button and activate 

All files in the list will be 

played once in random order

Start playback with the 

Play

button and activate 

, 

All files in the list will be 

continuously played in the 

same random order.

FollowMe TV (if available)

With your mobile device you can stream the current 

broadcast from your smart TV using the 

FollowMe 

TV

 feature. Install the appropriate Smart Center 

application to your mobile device. Start the application. 

For further information on using this feature refer to 

the instructions of the application you use.

Note:

 This application may not be compatible with all mobile 

devices. HD channels are not supported and both of the 

devices must be connected to the same network.

CEC and CEC RC Passthrough

This function allows to control the CEC-enabled 

devices, that are connected through HDMI ports by 

using the remote control of the TV.
The 

CEC

 option in the 

System>Settings>More

 menu 

should be set as 

Enabled

 at first. Press the 

Source

button and select the HDMI input of the connected 

CEC device from the 

Sources List

 menu. When 

new CEC source device is connected, it will be listed 

in source menu with its own name instead of the 

connected HDMI ports name(such as DVD Player, 

Recorder 1 etc.).
The TV remote is automatically able to perform the 

main functions after the connected HDMI source has 

been selected.

To terminate this operation and control the TV via 

the remote again, press 

Quick Menu

 button on the 

remote, highlight the 

CEC RC Passthrough

 and 

set as 

Off

 by pressing Left or Right button. This 

feature can also be enabled or disabled under the 

System>Settings>More

 menu.

The TV supports also ARC(Audio Return Channel) 

feature. This feature is an audio link meant to replace 

other cables between the TV and the audio system 

(A/V receiver or speaker system).
When ARC is active, TV does not mute its other audio 

outputs automatically. So you need to decrease TV 

volume to zero manually, if you want to hear audio 

from connected audio device only (same as other 

optical or co-axial digital audio outputs). If you want 

to change connected device’s volume level, you 

should select that device from the source list. In that 

case volume control keys are directed to connected 

audio device.

Note:

 ARC is supported only via the HDMI1 input.

System Audio Control

Allows an Audio Amplifier/Receiver to be used with 

the TV. The volume can be controlled using the 

remote control of the TV. To activate this feature set 

the 

Speakers

 option in the 

System>Settings>More

menu as 

Amplifier

. The TV speakers will be muted 

and the sound of the watched source will be provided 

from the connected sound system.

Note:

 The audio device should support System Audio Control 

feature and 

CEC

 option should be set as 

Enabled

.

E-Manual

You  can  find  instructions  for  your TV’s  features  in 

the E-Manual. 

To use E-Manual, press to the 

Info 

button while main 

menu is displayed on the screen or press 

Quick Menu

button, select 

Information

Booklet

 and press 

OK

.

By using the directional buttons select a desired 

category. Every category includes different topics. 

Select a topic and press 

OK

 to read instructions.

To close the E-Manual screen press the 

Exit

 or 

Menu

button.

Note:

 The contents of the E-Manual may vary according to 

the model.