background image

English

   - 77 -

Internet Connection Not Available / Audio Video 

Sharing Not Working

If the MAC address (a unique identifier number) of 

your PC or modem has been permanently registered, 

it is possible that your TV might not connect to 

the internet. In such a case, the MAC address is 

authenticated each time when you connect to the 

internet. This  is  a  precaution  against  unauthorized 

access. Since your TV has its own MAC address, 

your internet service provider cannot validate the MAC 

address of your TV.  For this reason, your TV cannot 

connect to the internet. Contact your internet service 

provider and request information on how to connect 

a different device, such as your TV, to the internet.
It is also possible that the connection may not be 

available due to a firewall problem. If you think 

this causes your problem, contact your internet 

service provider. A firewall might be the reason of a 

connectivity and discovery problem while using the 

TV in Audio Video Sharing mode or while browsing 

via Audio Video Sharing feature.

Invalid Domain 

Ensure that you have already logged on to your PC 

with  an  authorized  username/password  and  also 

ensure that your domain is active, prior to sharing 

any files in your media server program on your PC. If 

the domain is invalid, this might cause problems while 

browsing files in Audio Video Sharing mode. 

Using Audio Video Sharing Network Service

Audio Video Sharing feature uses a standard that eases 

the viewing process of digital electronics and makes 

them more convenient to use on a home network. 
This standard allows you to view and play photos, music 

and videos stored in the media server connected to your 

home network.

1. Nero Media Home Installation

The Audio Video Sharing feature cannot be used if the 

server programme is not installed onto your PC or if 

the required media server software is not installed 

onto the companion device. Please prepare your PC 

with the Nero Media Home programme. For more 

information about the installation, please refer to the 

Nero Media Home Installation

” section.

2. Connect to a Wired or Wireless Network

See the 

Wired/Wireless Connectivity 

chapters for 

detailed configuration information. 

3. Play Shared Files via Media Browser

Select 

Media Browser

 by using the 

directional

 buttons 

from the main menu and press 

OK

. The media browser 

will then be displayed. 

Audio Video Sharing

Audio Video Sharing support is only available in the 

Media Browser

 

Folder

 mode. To enable folder mode, 

go to the 

Settings

 tab in the main media browser screen 

and press 

OK

. Highlight 

View

 

Style

 and set to 

Folder

 

using the 

Left

 or 

Right

 buttons. Select the desired media 

type and press 

OK.

If  sharing  configurations  are  set  properly, 

Device 

Selection

 screen will be displayed after selecting the 

desired media type. If available networks are found, 

they will be listed on this screen. Select media server 

or network that you want to connect to using the Up 

or Down buttons and press 

OK

. If you want to refresh 

the device list, press the 

Green

 button. You can press 

Menu

 to exit. 

If you select the media type as 

Videos

 and choose 

a device from the selection menu. Then select the 

folder with video files in it on the next screen and all 

the available video files will be listed.
To play other media types from this screen, you can go 

back to main 

Media Browser

 screen and select the 

media type as desired and then perform the network 

selection again. Or press the 

Blue

 button to switch to 

next media type quickly without changing the network. 

Refer to the 

Media Browser

 menu section for further 

information on file playback.
Subtitle files do not work if you watch videos from 

your network through Audio Video Sharing feature.
You can connect only one television to the same 

network. If a problem occurs with the network, please 

switch your television off at the wall socket and back 

on again. Trick mode and jump are not supported with 

the Audio Video Sharing feature.
PC/HDD/Media Player or any other devices that are 

compatible should be used with a wired connection 

for higher playback quality.
Use a LAN connection for quicker file sharing between 

other devices like computers.

Note:

 There may be some PC’s which may not be able to 

utilize the Audio Video Sharing feature due to administrator 

and security settings (such as business PC’s).
For  best  home  network  streaming  with  this  TV,  the  Nero 

software should be installed.

Summary of Contents for 22FSB5002



























Reviews: