EN-11
2.
PROPER USE OF REFRIGERATOR
2.1 PLACEMENT
•
Before using the upright freezer,
remove all packaging materials
including bottom cushions and
foam pads and tapes inside the
upright freezer , tear off the
protective film on the door and
the upright freezer body.
•
Keep away from heat and avoid
direct sunlight. Do not place
the upright freezer in moist or
watery places to prevent rust or
reduction of insulating effect.
•
The upright freezer should be
placed in a well-ventilated indoor
place; the ground shall be flat, and
sturdy.
•
The top space of the upright
freezer shall be greater than
10cm,and the distances from
bothsides and backside shall be
more than 10cm to facilitate heat
dissipation.
Spare enough space for convenient
opening of the doors and drawers or
statement by the distributor.
10cm
10cm
D
H
10cm
10cm
10cm
W
Width “w”
472
Depth “D”
(without handle)
450
Height “H”
492
(unit: mm)
The measurements in the above table
may differ, depending on the measuring
method.
NOTE
This freezer needs to be installed
independently and cannot be used as a
built-in. Otherwise, it will cause problems
such as failure to install into the cabinet,
the performance and life of the product
are reduced. And the manufacturer does
not provide basic product warranty.
