English
- 56 -
Loop/Shuffle Mode Operation
Start playback with the Play
button and activate
TV plays next file and loop
the list.
Start playback with
OK
and
activate
The same file will be
played in a loop (repeat).
Start playback with
OK/Play
button
and activate
The file will be played in a
shuffle.
Quick Menu
The Quick Settings menu allows you to access
some options quickly. This menu includes
Power
Save Mode, Picture Mode, Favourites,
CEC RC
Passthrough,Sleep Timer, FollowMe TV, FollowMe
TV to DMR
and
Information booklet
options. Press
Quick Menu
button on the remote control to view the
quick menu. See the following chapters for details of
the listed features.
FollowMe TV
With your mobile device you can stream the current
broadcast from your smart TV using the
FollowMe
TV
feature. Install the appropriate
Smart Center
application to your mobile device. Start the application.
For further information on using this feature refer to
the instructions of the application you use.
Note:
This application is not compatible with all mobile device.
FollowMe TV to DMR
This feature allows video streaming from your TV
to another TV or mobile devices, using proper
applications (e.g. UPnP - Universal Plug and Play -
applications like BubbleUPnP). Activate
FollowMe TV
to DMR
and timeshifting starts. Press the red button
and device selection menu will be displayed. Choose
your device and press
OK
.
Note:
FollowMeTV and FollowMe TV to DMR features
work correlated with the PVR feature and requires a
connected USB storage device with FAT32 format and
enough space in it. HD channels are not supported and
both of the devices must be connected to the same
network.
E-Manual
You can find instructions for your TV’s features in
the E-Manual.
To use E-Manual, press to the
Info
button while main
menu is displayed on the screen.
By using the navigation buttons select a desired
category. Every category includes a different topics.
Select a topic and press
OK
to read instructions.
To close the E-Manual screen press the
Exit
button.
Note:
The contents of the E-Manual may vary according to the
model.
CEC and CEC RC Passthrough
This function allows to control the CEC-enabled
devices, that are connected through HDMI ports by
using the remote control of the TV.
The
CEC
option in the
Other
Settings
menu under
Settings
menu should be set as
Enabled
at first.
Press the
Source
button and select the HDMI input
of the connected CEC device from the
Source List
menu. When new CEC source device is connected,
it will be listed in source menu with its own name
instead of the connected HDMI ports name(DVD
Player, Recorder 1 etc.).
The TV remote is automatically able to perform the
main functions after the connected HDMI source has
been selected.
To terminate this operation and control the TV
via the remote again, press and hold the “0-Zero”
button on the remote control for 3 seconds. Or press
Q.Menu
button on the remote, highlight the
CEC
RC Passthrough
and set as
Off
by pressing
Left
or
Right
button. This feature can also be enabled or
disabled under the
Settings/Other Settings
menu.
The TV supports also ARC(Audio Return Channel)
feature. This feature is an audio link meant to replace
other cables between the TV and the audio system
(A/V receiver or speaker system).
When ARC is active, TV does not mute its other audio
outputs automatically. So you need to decrease TV
volume to zero manually, if you want to hear audio
from connected audio device only (same as other
optical or co-axial digital audio outputs). If you want
to change connected device’s volume level, you
should select that device from the source list. In that
case volume control keys are directed to connected
audio device.
