4
4.0
Scale Operation
Turning on the scale:
Be sure the battery is charged or that the AC adapter is plugged in.
Press the
On/Off/Zero
key on the front panel to turn the scale on. See
illustration above.
When the startup routine is finished, the scale is ready.
Simple weighing:
Empty the scale and press the
On/Off/Zero
key if the display is not at
0
.
Place item(s) to be weighed on the scale. Weight is displayed.
Remove item and repeat process.
Tare/Net weighing:
Empty the scale and press the
On/Off/Zero
key if the display is not at
0
.
Place container to be tared on the scale and press the
Tare/Units
key for
less than five seconds.
Net
annunciator lights when a tare is active.
Place item(s) to be weighed in the container. Net weight is displayed.
Remove and repeat process.
Removing a tare:
To remove an active tare weight, empty the scale, wait for the scale to
stabilize. The unit of measure annunciator will glow steady when the scale
is stable or blink while motion occurs. Press the
Tare/Units
or
On/Off/Zero
key to remove the active tare.
Changing unit of measure:
Press and hold the
Tare/Units
key for five seconds to change the unit of
measure. Repeat to change to the next unit of measure.
Turning the scale off:
Press and hold the
On/Off/Zero
key for five seconds.
