Salter Brecknell C3235, User Instructions

7

The current value for the lower range is displayed, the 

Under

annunciator flashes, and the first digit flashes. What you set with 
the following steps is the lowest acceptable weight for the item to 
be weighed.  
 
Remember as you set the values for the lower and upper ranges 
that the decimal does not appear on the display but you enter the 
values as if it were. 
 
For example: If you want 2.55 pounds as the lower value, enter 
02550 on the display.

5.

Press the 

F

 key to increment the digits and the 

TARE

 key to accept a 

digit and move to the next position. Repeat this until you’ve entered 
the lowest acceptable weight value…

The current value for the upper range is displayed, the 

Over

annunciator flashes, and the first digit flashes. What you set with 
the following steps is the highest acceptable weight for the item to 
be weighed.  
 
Remember as you set the values for the lower and upper ranges 
that the decimal does not appear on the display but you enter the 
values as if it were.

For example: If you want 2.85 pounds as the high value, enter 
02850 on the display.

6.

Press the 

F

 key to increment the digits and the 

TARE

 key to accept a 

digit and move to the next position. Repeat this until you’ve entered 
the highest acceptable weight value…

The scale returns to normal weighing mode when you’ve finished 
entering the high value.

7.

When you select 

oFF

 for the 

rAnGE

…

The scale returns to the normal weighing mode.

The upper limit should be larger than lower limit. If you attempt to set other 
than this, the scale will show 

oFF

 and return to the normal weighing mode.

Performing a Checkweighment

1.

After setting a lower and upper limit, place the item to be weighed on 
the scale.

When the weight is stable, the weight will be displayed and the 

Over

, 

Under

 or 

Accept

 annunciator will light. If the weight is in the 

acceptable range, the beeper will sound.