4
4.0
Scale Operation
1.
Turn the scale on using the
ON/OFF
key on the front panel…
The unit will beep and the display will do a startup test, show the
capacity, the battery voltage and then display
0.0
weight.
2.
Apply the load to the hook at the bottom of the scale…
The weight is displayed.
3.
Remove the weight…
0.0
is displayed.
4.
Repeat steps 2 and 3 to weigh the next object.
Performing a Tare Weighment
1.
With the scale on and showing
0.0
weight, hang the load to be tared from
the hook…
The gross weight is displayed.
2.
Press the
TARE
or
RC TARE
key…
The
TARE
annunciator lights and
0.0
is displayed.
3.
Apply the load to be weighed on the hook…
The net weight is displayed.
4.
Remove the net load and repeat step 3 to weigh the next object.
5.
To cancel a tare, remove all weight from the scale and press the
TARE
or
RC TARE
key…
The
TARE
annunciator turns off and the display shows
0.0
weight.
Summary of Contents for CS
Page 13: ......
