Ⅱ
.
KEY FUNCTION:
1.
FACEPLATE:
2.
DISPLAY SYMBOL MEANING:
2.1
Zero
◄
--------The scale is at zero point and the gross weight is 0
2.2 Net
◄
---------The display reading is net weight, and the tare weight is not 0.
2.3
X
Hold
-------The scale is under HOLD mode.
It displays the current live weight when
X
flashed, and the locked reading
Will be shown when
X
does not flash and comes steady.
3.
SUMMARY of KEY DEFINITION:
3.1
In normal weighing mode press and hold down keys for 3 seconds:
(1)
a. If this key is only set for HOLD (P2=0), press this key to enter or exit
HOLD mode.
b. If this key is only set for PRINT (P2=1), press this key to output the data
according to P4 setting.
c. If this key is set for both HOLD and PRINT function (P2=2), press this key
HOLD
UNIT
TARE
ZERO
HOLD
3
to output the data according to P4 setting.
(2)
Choose weighing units among kg-lb-lb: oz
Note: The weighing units that can be used are restricted by display
division, and calibration weight unit (restricted by P8, P9, and P10):
For example, if the calibration unit is “kg”; calibration display resolution
is 50kg (that means: P8=5, P9=0, P10=0), and users press UNIT key to
choose weighing units. Lb or lb:oz are not allowed to choose, since the
display resolution of 100lb or 2000oz is not available to this indicator.
(3)
Tare the weight. This function can be activated only when the scale is in
stable mode and the gross weight is not negative value.
(4)
Zero function. When the weight is within zero range, it will active as
ZERO function and clear the tare weight. When the weight is not within
zero setting range (P13 set), the scale will show 0
¯ ¯ ¯ ¯
(zero point is over
the setting range), or 0
_ _ _ _
(
zero is below the setting range).
3.2.
In normal weighing mode and hold down time longer than 3s:
(1) (2) (3)
Same meaning with that in 3.1
(4) : Power off the scale.
(5) +
UNIT
TARE
ZERO
HOLD
UNIT
TARE
OFF
HOLD
UNIT
TARE
OFF
OFF
HOLD
4
