8
7
8. EDITING FOOD ENTRIES
If you need to edit any of the foods that you have added to the database, follow the
instructions below:
a)
Turn on the scale and press MENU
b)
Scroll down to the EDIT FOOD ITEM option, then press ENTER
c)
Type the name of the food to be edited. You then have the option to edit the name
of the food (if required) by deleting/retyping
d)
To edit the nutritional values, press ENTER again. After editing the values, scroll
down to the bottom of the screen and press ENTER.
You will be asked to confirm the changes before the item is updated.
9. DELETING FOOD ENTRIES
To delete a food item that you have added to the database:
a)
Turn the scale on and press MENU
b)
Scroll down to the DELETE FOOD ITEM option, then press ENTER
c)
Type the name of the food to be deleted, then press ENTER.
You will be asked to confirm that you want to delete the food.
Press ENTER again and the food will be deleted.
10. POWER SAVE FEATURE
To preserve battery power, the NUTRI-WEIGH has an auto switch-off feature that will
operate if the scale has not been in use for 5 minutes.
Switching the scale off manually will help to further extend battery life. To switch off
manually press the blue power button .
All data entries are retained when the scale switches off.
11. BATTERY REPLACEMENT/OPTIONAL MAINS SUPPLY
The display will show ‘Lo’ when the batteries need replacing.
Switch the NUTRI-WEIGH off, then remove the old batteries and replace with four
brand new alkaline AA size batteries. The battery compartment is situated in the
base of the scale and is marked to show the correct orientation of the + and -
battery terminals.
Note:
All saved data will be retained whilst batteries are changed.
As an alternative to batteries, the NUTRI-WEIGH can be operated using a mains power
adaptor. The power socket is located on the left hand side of the NUTRI-WEIGH .
An adaptor is not supplied with this scale but if you decide to use one please ensure
you use a 6V DC mains power adaptor, rated between 120mA and 1200mA (maximum),
with a 3.5mm phono plug with negative tip polarity (sometimes referred to as
centre negative).
CAUTION: Always switch the NUTRI-WEIGH off and remove the batteries before
connecting a power adaptor.
When a power adaptor is used instead of batteries, the power save feature is replaced
by a sleep mode. If the NUTRI-WEIGH has not been used for 10 minutes, the display
screens will switch off and the scale will be in ‘sleep mode’. To re-activate the NUTRI-
WEIGH, press the ON button and the program will return to the exact point at which
it switched off.
Please ensure you only use the adaptor specified above. Failure to comply with
this warning could result in your NUTRI-WEIGH being damaged. Please note that
damage caused by misuse is not covered under the guarantee.
12. CLEANING AND CARE
The stainless steel weighing platform is removable for easy cleaning and is
dishwasher-safe. The rest of the NUTRI-WEIGH can be cleaned with a slightly damp
(but not wet) cloth.
DO NOT immerse the NUTRI-WEIGH in water or use chemical/abrasive
cleaning agents.
All plastic parts should be cleaned immediately after contact with fats, spices,
vinegar and strongly flavoured / coloured foods.
Avoid contact with acids such as
citrus fruits.
13. NUTRITIONAL INFORMATION
Sources of Nutritional Data:
i.
USDA National Nutrient Database for Standard Reference, Release 17
ii.
International table of Glycemic Index and Glycemic Load Values: 2002
(Am J Clin Nutr 2002; 26:5-56)
Note:
i.
The ‘net carbs’ value is calculated as ‘net carbs’ = carbohydrate - fibre.
ii.
The G.I. value is also known as Glycemic Index.
Salter offers a number of heath related products including ‘Body Analyser Scales’, to
help you manage your health and weight better. For a full list of products or stores
that sell these products please visit
www.salterhousewares.co.uk
or contact us via:
Salter Housewares Ltd. 211 Vale Rd, Tonbridge, Kent TN9 1SU, England.
T: +44 (0) 1732 354 828
F: +44 (0) 1732 358 631
E: uksales@salterhousewares.co.uk
3
20
6
3
