OWNER’S MANUAL V. 1 ENGLISH
PT-297 MOTORIZED TREADMILL
This manual is available at
www.salter.es
10
ENGLISH
DOWN
：
Press this button while running to decrease the incline. Press once each time decreases one incline level.
ENTER
：
Press this button to enter setting the parameter. While setting, press this button again to accept and enter
next step. Press this button while running to switch the dot matrix window between speed and incline profiles.
FAN
：
This function is optional. Press this button to the fan on/off.
PROGRAM:
Press this button to choose training mode. There are four modes: MANUAL, RANDOM PROGRAM, USER
and HRC (Heart Rate Control).
SELECT
：
While running RANDOM PROGRAM, you can keep on pressing this button to generate new programs until
there is the program you want.
SPEEDY BUTTON FOR SPEED
：
There are five speedy buttons for speed: 2KM/h, 4 KM/h, 6 KM/h, 8 KM/h and 10 KM/h
for speedy setting.
SPEEDY BUTTON FOR INCLINE
：
There are five speedy buttons for incline: 2, 4, 6, 8 and 10 for speedy setting.
Audio Input: This function is optional. It plays the audio signal by the speaker through the internal amplifier.
SAFETY KEY
: Put on this key after turning on the power to function the treadmill. Taking off this key automatically shuts
down the treadmill.
5.3. FUNCTION MODES
SPEEDY START. The user initiates the training immediately.
Press START button to speedily start the treadmill after turning on the power and putting on the safety key. Both speed
and incline will be at the lowest value. The user has to adjust them to the desire levels manually using UP/DOWN y
SLOW/FAST buttons.
P0 MANUAL MODE. The user sets an objective parameter.
A. Use PROGRAM button to choose PO MANUAL then press ENTER to set parameters. First is setting weigh. Use
FAST/SLOW buttons to adjust the weigh and press ENTER for next setting.
B. Now the AGE will be displayed. Use FAST/SLOW buttons to select the correct value then press ENTER for next
setting.
C. Choose one of count-down factors TIME, DISTANCE, CALORIES and use SELECT to confirm then press ENTER to set
the value. You can press SELECT to return to select the factor again.
D. Now the selected factor and the value will be displayed. Use FAST/SLOW buttons to select the proper value and
press START to start the treadmill and finish the setting.
E. You can press STOP button to return to the previous step or START to start the treadmill.
RANDOM PROGRAM. This mode which is a profile includes speed and incline automatically generated by the
program. The user can continually choose the profiles until the one which is satisfied. It can also save the USER mode
and make adjustments until a most suitable profile is reached.
A.
Use PPROGRAM button to select RANDOM PROGRAM mode and press ENTER to profile selection.
B.
Now the dot matrix will display speed profile for 5 seconds then switch to incline profile for another 5 seconds and
recycle. Press ENTER to select the profile and forward to enter next parameter. Press SELECT button to generate
new profile. This step can be continued until ENTER is pressed.
C.
Now the value of the weight is displayed. Use FAST/SLOW buttons to adjust the weight and press ENTER for next
setting.
D.
Now the value of the age will be displayed. Use FAST/SLOW buttons to adjust the age and press ENTER for next
setting.
E.
Now the preset time 20:00 will be displayed. Use FAST/SLOW buttons to adjust for proper time duration and press
START to start the treadmill.
F.
The profile can be saved as an USER profile when the workout is finished. The USER can be adjusted whenever is
necessary.
