background image

 

 

 

OWNER’S MANUAL  V. 1 ENGLISH 
PT-297 MOTORIZED TREADMILL  
 
         This manual is available at 

www.salter.es

 

 

 

ENGLISH 

1.

 

SAFETY INSTRUCTIONS 

 
WARNING: To reduce the risk of serious injury, read the following safety instructions before using the equipment.

 

 

1.

 

Read all warnings posted on the equipment. 

2.

 

Read  this  Owner's  Manual  and  follow  it  carefully  before  using  the

 

equipment

Make  sure  that  it  is  properly 

assembled and tightened before use. 

3.

 

We recommend that two people be available for assembly of this product. 

4.

 

Keep children and pets away from the equipment. Do not allow children and pets to use or play on the equipment. 

Always keep children and pets away from the equipment

 

when it is in use. 

5.

 

It is recommended that you place this exercise equipment on an equipment mat. 

6.

 

Set up and operate the equipment

 

on a solid level surface. Do not position the equipment

 

on loose rugs or uneven 

surfaces. 

7.

 

Inspect the equipment

 

for worn or loose components prior to each use. 

8.

 

Tighten / replace any loose or worn components prior to using the

 

equipment. 

9.

 

Consult a physician prior to commencing an exercise program. If, at any time during exercise, you feel faint, dizzy, 

or experience pain, stop and consult your physician. 

10.

 

Follow your physician's recommendations in developing your own personal fitness program. 

11.

 

Always choose the workout which best fits your physical strength and flexibility level. Know your limits and train 

within them. Always use common sense when exercising. 

12.

 

Before using this product, please consult your personal physician for a complete physical examination. 

13.

 

Do not wear loose or dangling clothing while using the

 

equipment. 

14.

 

Never  exercise  in  bare  feet  or  socks;  always  wear  correct  footwear,  such  as  running,  walking,  or  cross-training 

shoes. 

15.

 

Be  careful  to  maintain  your  balance  while  using,  mounting,  dismounting,  or  assembling  the  equipment  loss  of 

balance may result in a fall and serious bodily injury. 

16.

 

Keep both feet firmly and securely on the Foot Pedals while exercising. 

17.

 

The equipment

 

should not be used by persons weighing over 120 kg. 

18.

 

The equipment

 

should be used by only one person at a time. 

19.

 

The equipment is for semi-commercial, light-commercial and home usage. 

20.

 

Maintenance: Replace the defective components immediately and / or keep the equipment out of use until repair 

the equipment completely.

 

 

21.

 

Make  sure  that  adequate  space  is  available  for  access  to  and  passage  around  the  equipment;  keep  at  least  a 

distance of 1 meter from any obstruction object while using the machine 

 

WARNING: 

Before  starting  any  exercise  or  conditioning  program  you  should  consult  with  your  personal  physician  to 

see  if  you  require  a  complete  physical  exam.  This  is  especially  important  if  you  are  over  the  age  of  35,  have  never 

exercised before, are pregnant, or suffer from any illness. 
 
 
 
 

 

Summary of Contents for PT-297




















Reviews: