OWNER’S MANUAL V. 1 ENGLISH
PT-297 MOTORIZED TREADMILL
This manual is available at
www.salter.es
9
ENGLISH
5. CONSOLE INSTRUCTIONS
After turning on and put on the safety key, the console will show up welcome greeting then display total running
mileage, hours, program version and then enter ready mode. When total mileage accumulates to 100 km total running
time to 150 hours, the system will show a lubrication prompt. After this prompt is shown two times, the message will
be deleted automatically.
5.1. WINDOW DISPLAYS
TIME
：
Accumulated running time from 00:00~99:59 or count-down time from 10~99:00.
SPEED
：
Showing the running speed of the tread belt from 1KM/h(0.6)~16KM/h(10)
DISTANCE
：
Accumulated running distance from 0.1~99.99KM.
CALORIES
：
Showing the fat burnt from 0.1~999.9 calories.
INCLINE
：
Showing 16 incline levels from 0~15.
PULSE
：
Showing the heart rate value either wearing heart rate monitor stripe or gripping hand pulse sensor, the heart
rate value is displayed in this window.
LAPS
：
Displaying track with one circle stands for 0.4KM with value from 0~99.
5.2. FUNCTION BUTTONS
START
：
Press this button, while running, to start the treadmill after displaying 3, 2, 1, GO.
STOP
：
Press this button to gradually stop the treadmill and end the workout.
FAST
：
Press this button to increase workout speed. Press once each time increases 0.1KM/h. The increment can be
adjusted between 0.1 and 1while setting the treadmill factor.
SLOW
：
Press this button to decrease workout speed. Press once each time decreases 0.1KM/h. The increment can be
adjusted between 0.1 and 1 while setting the treadmill factor.
UP
：
Press this button while running to increase the incline. Press once each time increases one incline level.
