USER’S MANUAL V122023 ENGLISH
RS-23 ELLIPTICAL
This manual can be downloaded on
www.salter.es
USER PROGRAM
1. After entering USER PROGRAM mode, the first column of the profile is blinking (FIGURE 25). User may
scroll the jog dial to adjust the resistance level (FIGURE 26) to create his/her own profile.
2. After setting (from column 1 to column 20), user may hold on pressing MODE button for 2 seconds to
quit profile setting and enter TIME setting.
3. While making the profile setting, user can press RESET and return to the menu.
4. After start training (FIGURE 27~29), TIME will be counted down. When TIME is counted to 0, the screen is
flashing and the alarm is ringing. User can press any button to stop the alarm.
13
