NovaChat User’s Guide
143
Setting up Wired Switches
1.
Plug the switch into switch jack A or switch jack B on the device. If
you are using two switches, plug a switch into each jack.
Cords and cables are potential entanglement or strangulation hazards.
Please consider this prior to placing these items with device users.
2.
To enable scanning, choose
Menu
>
Settings
>
Input
>
Scanning
>
Enable Scanning
.
3.
To set up the switch or switches you connected to the switch jacks,
select
Switch Access
. The switch access settings are displayed.
4.
Choose
Switch Configuration
and choose the number of switches
you plan to use.
If you selected
One Switch
in the Switch Configuration window,
Switch 1 will be active and Switch 2 will be grayed out. If you
selected
Two Switch
, both Switch 1 and Switch 2 will be active.
Note:
When “(Left)” or “(Right)” appears in a Switch 1 or Switch 2
setting, it does not affect how you should set up the switch. It only
refers to the internal technical configuration of the switch, which
you can disregard.
