TouchChat Express User’s Guide
73
Setting up and Using Switch Scanning
As an alternative to directly choosing each button on the screen, single-switch and two-switch scanning
are available.
Enabling Scanning
Press the device’s Home button. Then choose Settings > General > Accessibility > Switch Control. Turn
Switch Control on.
Defining the Switches
You can either use an external switch that is plugged into the edge of the device switch jack A or B or
you have the option to use the screen as a switch.
To use an external switch:
1.
Plug the switch into the edge of the device. Use either jack A or B or both.
2.
Choose Settings > General > Accessibility > Switch Control.
3.
Choose Switches > Add New Switch > External.
4.
Press the external switch.
5.
Name the switch.
6.
Choose the switch action to perform.
•
If you are using just one switch, choose Select Item.
•
If you are using a second switch, choose Add New Switch. For the switch action, you could
choose Move To Next Item.
•
If you need another option, you can use the screen as a switch.
After setting up your switch:
Press the device’s Home button. Then choose Settings > General > Accessibility > Switch Control. Turn
Switch Control off and then back on.
Summary of Contents for TouchChat Express
Page 2: ......
Page 187: ......
Page 188: ...Saltillo Corporation 2143 Township Road 112 Millersburg OH 44654 www saltillo com...