9
No steam
Steam control is not set to the
steam position.
Turn the temperature control to
the correct position.
No water in the water tank.
Fill water in the water tank.
Dripping
The temperature control is not
set in the steam area.
Set the temperature control to
the steam area.
Soleplate doesn’t reach the
temperature required.
Turn up temperature properly
No heat
Power cut or fuse-wire cut off
Change fuse wire or stop using
the appliance. Have it examined
and/or repaired.
Little steam
The steam opening is blocked
by dirt.
Remove dirt with distilled
water.
Temperature control is not set in
the steam area.
Adjust the temperature control
to the steam area.
Inadequate
heat or too
hot
The position of temperature
control is not correct
Turn the steam control to the 0
or little steam position.
14. AUTO-INTERRUPTION SAFETY PROTECTION FUNCTION
When the auto-temperature modulator ceases to be effective, the super-temperature fuse
installed in the product will automatically come into effect to prevent overheating. Should
this happen, please take your appliance in to be examined and serviced.
