BEFORE FIRST USE
1. Lift the Extractor Head straight up and remove from the unit.
2. Turn the Bowl clockwise until it stops then lift from the Motorized
Base.
3. Wash the Removable Bowl, Extractor Head, Reusable Sticks and the
Measuring Scoop in warm soapy water. Rinse and dry thoroughly
before using.
4. Wipe the Motorized Base with a damp cloth. Wipe with a dry cloth.
IMPORTANT: Ensure that water does NOT enter the Base.
5. Reassemble the unit by placing the Bowl over the Base. Turn the
Bowl counter-clockwise until it locks into position.
6. Align the notches in the Extractor Head stem over the tabs in the
Heating Element stem and press the Extractor Head down gently.
Turn the Extractor Head if the notches and tabs are not aligned.
7. Your Cotton Candy Maker is now ready to use.
HOW TO USE
1. Assemble the Cotton Candy Maker and place on a dry, stable, level
surface.
2. Ensure that the On/Off Switch is in the OFF position.
3. Plug into a 120V AC electrical outlet.
4. Pour 1 scoop of flavored sugar or 2 hard candies, evenly spaced into
the Sugar/Candy Chamber. DO NOT overfill the Sugar/Candy
Chamber by adding more than two candies or 1 scoop (1 tbsp/15ml)
of sugar.
5. Press the On/Off Switch to the ON position.
IMPORTANT: The Extractor Head and Heating Element will be
very hot during use. Never touch either of these parts until they
have cooled completely.
6. When you see the cotton candy floss begin to form, collect the cotton
candy on the provided sticks by holding the stick vertically and circle
the bowl to collect the cotton candy.
NOTE: Wet the stick before starting to collect the cotton candy. This
will allow the cotton candy to adhere to the stick.
7. Turn the unit off when all the sugar or candy has been dispensed.
For additional batches allow the Extractor Head to come to a
complete stop. Follow the directions in # 4 – 6 above. The Cotton
Candy will form more quickly as the unit is already hot.
4
