BEFORE FIRST USE
1. Wipe the inside of the freezer and the Door Gasket with a cloth or sponge
dampened in a warm water and baking soda solution, 30 ml (2 tbsp)
baking soda to 1 liter/quart of water.
2. Wash the shelf with mild detergent.
3. The exterior should be cleaned with a soft cloth dampened in mild
detergent and warm water.
4. Wring excess water out of the cloth before cleaning any areas that have
the controls or electrical parts.
REVERSING THE DOOR
Your freezer has been built to open from the right; however, it has been
designed to open from either side and can easily be changed by following the
procedure below. You will need a screwdriver and putty knife or other thin flat
device to remove the hinge covers. Use care to prevent scratching the surfaces.
1. Unplug the freezer from the wall outlet and empty, including the shelves.
2. Remove the 2 top hinge covers and the screw-hole cover on the door and
set aside.
3. Place protective padding behind the freezer and tilt the freezer backwards
against the protective padding.
4. Remove the screws from the current hinges underneath the appliance.
5. Transfer the hinges into the receptacle on the other side of the door, and
thread and secure the screws in their new location. Replace the door.
Replace the hinge covers appropriately.
5
Booklet_CF-2060_EN.qxd:Salton Booklet 3/27/09 3:31 PM Page 5
