GROUNDED PLUG
This appliance has a polarized plug (one blade is wider than the other). To
reduce the risk of electric shock, this plug will fit in a polarized outlet only
one way. If the plug does not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician. Do not modify the plug in any way.
DESCRIPTION OF PARTS
1. Plastic Cap
2. Cover
3. Stirring Rod
4. Center Knob
5. Popping Surface
6. Base
7. On/Off switch
HOW TO USE
1. Place the Base on a flat, dry surface close to a 120 volt AC outlet.
2. See the chart below and measure the proper amount of vegetable oil and
kernels. Pour oil onto the Popping Surface then spread the corn kernels
evenly over Popping Surface.
NOTE: DO NOT add more corn kernels or oil than is recommended.
DO NOT substitute butter, margarine, shortening or lard for vegetable
oil as they will burn or smoke excessively.
3. Place Cover on Base making sure the handles of the Cover fit into the
handles of the Base.
4. Remove the Plastic Cap.
5. If butter corn is desired, divide recommended amount of refrigerated
butter into 6 equal-sized pats and place in a single layer over the butter
holes in the Butter Well. If unrefrigerated butter is used, add to Butter
Well after the first corn kernel pops.
6. Plug the Popcorn Maker into the outlet and switch the unit to the 'I'
position.
3
1
2
3
6
5
4
7
Booklet_TCP-615R_EN:TCP-6L Booklet_VHR 3/8/10 12:26 PM Page 3
