CLEANING AND STORAGE
Quick Storage
1. Turn the Lighted On/Off Switch to ‘Off’.
2. Unplug the Power Cord.
3. Wrap the Hose around the Telescopic Pole one time.
4. Hang the Steam Nozzle from the Steam Nozzle Holder.
5. Loosen the two ridged knobs on the Telescopic Pole by turning them
counter-clockwise.
6. Push down on the Pole Top and the pole will collapse to a compact height.
7. Roll the unit to a convenient storage location.
Long Term Storage
We recommend you follow this procedure at least once per week. Use of
distilled or de-mineralized water reduces the need for cleaning and prolongs
the life of your steamer.
1. Turn the Lighted On/Off Switch to ‘Off’.
2. Unplug the unit from the power outlet.
3. Wait for the unit to cool completely (at least 30 minutes).
4. Remove the Hose and the Telescopic Pole and set them aside.
5. Carry the unit to a sink or tub.
6. Remove and drain the Water Tank. Rinse the Water Tank with fresh water
and drain completely.
7. Drain the Steamer by removing the Drain Plug and emptying the contents
into the sink or tub. Tilt the unit towards the Drain Plug to facilitate
removal of the water.
8. Flush the unit by filling the Water Reservoir and the Hose Base with fresh
water and draining completely. Replace the Drain Plug.
9. Place the Water Tank back on the Water Reservoir.
10. Reattach the Telescopic Pole and Hose.
11. Follow steps 3- 7 of the Quick Storage procedure above.
8
4444_Booklet SF-407_ENG.qxd 7/7/08 10:57 AM Page 8
