Salton JE1372, Instruction Booklet

BEFORE FIRST USE

1. Carefully unpack the VitaPro Juicer 
2. Follow the disassembly instructions. 
3.  Wash all the removable parts including the Cover, Food Pusher, Sweeper 

Basket, Strainer, Auger and Juice Bowl in warm soapy water.  Rinse and dry. 

NOTE:

  use care when handling the Strainer.  Hold by the rim only to avoid 

damaging the delicate stainless steel foil. 

DISASSEMBLING THE VITAPRO JUICER

1.  Remove the Cover by turning it counterclockwise until the tab on the Cover 

releases from the slot in the main housing. 

2.  Turn Juice Bowl counterclockwise to the unlock position and lift from the main 

housing. 

3.  Place on fl at surface. While holding bowl with one hand lift Strainer with other 

parts out of Juice Bowl. Disassemble. 

ASSEMBLING THE VITAPRO JUICER 

1.  Assemble the Juice Bowl on the Base 

by lining up the 2 unlock arrows. There 
is one arrow on the main housing and 
one on the Juice Bowl.

Turn the Bowl clockwise so that its 
arrow is aligned with the “locked” 
arrow on the main housing. 

2.  Place the Sweeper Basket inside 

the Juice Bowl. 

3.  Place the Strainer inside the 

Juice Bowl so that the red dot 
on the Strainer lines up with the 
red dot on the Juice Bowl. 

4.  Place the Auger in the center of the 

Juice Bowl. Gently push the Auger 
down and twist until you hear it click 
into position.

5.  Place the Cover onto the Juice 

Bowl.  

IMPORTANT:  Line up 

the grey dot on the Cover with
the red dot on the Juice Bowl.  

Turn the Cover clockwise until 
the arrow on the Cover is 
PERFECTLY lined up with the arrow 
printed on the Main Housing. 

5

Bowl

Base

  Ill. 1

Red dot on 
juice bowl

Red dot on 
strainer

  Ill. 2

Gray dot on 
food chute

Red dot 
on bowl

  Ill. 3

JE1372_JuicerBooklet_E.indd   5

JE1372_JuicerBooklet_E.indd   5

13-07-25   8:39 AM

13-07-25   8:39 AM