OPERATING INSTRUCTIONS
Setting the Clock
1. When the microwave oven is plugged into the outlet, the oven will
display “0.00”
2. Press “CLOCK/PRE-SET”, and the LED will display 00:00 and the clock
indicator icon will light up in the Display Window. The numbers will
flash starting with the first hour digit.
3. Press the number pads and enter the correct time. For example, to set
the time of 11:30, press the numbers 1,1,3 & 0, one at a time.
4. Press ‘AM/PM’ to choose AM or PM.
5. Press CLOCK/PRE-SET to finish setting the clock. The clock indicator will
go out and the ‘ : ‘ will be flashing. The clock icon will go out.
NOTE:
•
If the numbers that are input are not within a time range then the setting
will not be valid and the clock will not be set.
•
In the process of setting the clock, if STOP/CLEAR is pressed or if there
is no operation within 1 minute, the oven will go back to the former
setting automatically.
Setting the Kitchen Timer
1. Press KITCHEN TIMER and 00:00 and the clock indicator icon will
light up in the Display Window.
2. Press the number keys and enter the desired time. The maximum time
is 99 minutes and 99 seconds. NOTE: To set less than a 4 digit time
(Ex. 1 minute 30 seconds) the first digit should be a ‘0’ (0130)
3. Press START/+30 SEC to confirm the setting and start the timer. The clock
icon will show in the Display Window.
4. When the preset time has expired the clock icon will go out and
a ‘beep’ will sound 5 times.
14
SAL7-514 Modifications Booklet MW-2003_EN_V1 15/03/07 16:50 Page 14
