5
OPERATING INSTRUCTIONS
FILLING THE AIR COOLER
1.Rotate the small knob downwards
NOTE: Always ensure the air cooler is disconnected before filling the water
tank
•
The water tank must be opened by gently pulling it outward. The water
tank must not be pulled outward so that it detaches from the unit and not
too much force must be used as it is attached to other components in the
air cooler.
•
Ensure that the drainage plug
at the base of the cooler is firmly in place.
When pulling out the water tank this drainage plug can be seen in the
bottom right-hand corner of the water tank.
•
Pour water into the
small
compartment until the water level is between
“Min” and “Max” – as viewed through the window of the water level
indicator
Do not overfill the reservoir of the water tank because water could spill
over the sides of the tank and into the cooler operating mechanisms.
NB - Do not use hot water.
3.Add the water into water tank
2. Pull out the water tank
4. Put ice cubes into the
ice compartment
5. Put the ice packs into the water
tank
