15
The walls of the appliance should be cleaned with a damp cloth, sponge or
nylon scouring pad and mild detergent. Do not use steel wool, scouring pads
or scrape the walls with a metal utensil, as this may damage the inner
surface.
The door can be wiped with a damp sponge and wiped dry with a paper or
cloth towel.
Clean the outside with a damp sponge. Do not use an abrasive cleaner as it
may damage the exterior finish.
Do not use an abrasive cleaner, steel wool or scouring pad on the drip pan as
it may damage the porcelain enamel finish.
Do not let water enter the appliance.
Do not use bleach or other abrasive substance or solvents to clean your
appliance as it can be damaging to the finish.
Do not immerse the unit in water or any other liquid, or hold it under a running
tap to clean.
To remove stubborn spots/marks, wipe the surfaces with a cloth slightly
dampened in soapy water or mild non-abrasive cleaner. Rinse and dry a
clean, dry, soft cloth.
Let all parts and surfaces dry thoroughly prior to plugging it in and using it.
STORING THE APPLIANCE
Unplug the unit from the wall outlet and clean all the parts as instructed
above. Ensure that all parts are dry before storing.
Store the appliance in its box or in a clean, dry place.
Never store the appliance while it is still wet or dirty.
Never wrap the power cord around the appliance.
SERVICING THE APPLIANCE
There are no user serviceable parts in this appliance. If the unit is not operating
correctly, please check the following:
