5. Press the toasting lever down until it locks into place. The toasting cycle will
automatically commence. Please note: if the toaster is not plugged in and switched on
at the power point, the carriage control lever will not lock into place.
6. The toaster turns off automatically once the toasting cycle is complete and
automatically raises the toast and switches off the heating elements. The toasting
process can be stopped at any time by pressing the cancel button.
CRUMB TRAY
7. Your toaster comes with a hinged crumb tray. This is a quick and convenient way to
remove crumbs. Always ensure that the toaster is unplugged and has cooled down
before unhinging the crumb tray. Clean the crumb tray regularly with a damp cloth and
always dry the tray properly before putting it back into its original position. Do not
allow crumbs to build up in the tray.
PLEASE NOTE:
The inside of the toaster becomes hot during use. If bread becomes trapped in the
slots, remove the plug from the mains, hold toasting lever in the down position and
remove the bread carefully.
Take care not to damage the heating elements while removing the bread.
Never use a metal object to remove the bread.
Dry or thin slices will toast more quickly than moist or thick slices, requiring a lower
browning control stetting. When toasting more than one slice at the same time, use
a similar size and consistency of bread to achieve equal browning.
MAINTENANCE AND CLEANING
Do not immerse the unit, power cord or plug into water or any other liquids.
To clean, UNPLUG THE TOASTER AND ALLOW TO COOL.
To remove any crumbs from the toaster, unhinge the crumb tray underneath the
toaster, empty and ensure it is properly clipped into place before using it again. The
crumb tray should be cleaned regularly. Do not allow breadcrumbs to accumulate
in the bottom of the toaster.
To clean the interior, turn the toaster upside down and lightly shake the crumbs free.
