5
OPERATING YOUR AIRCOOLER
Place your air-cooler on a smooth, level surface.
Fill the air-cooler as per the instructions above.
Note For a cooler environment, we recommend that ice be added at this point to the
large compartment.
Plug the air-cooler into a mains outlet ensuring that the power supply used
matches that indicated on the rating label.
Select the desired fan speed using the control panel or the remote control. An
indictor light will reflect the chosen fan speed.
o
Three fan speed options exist – Low, Medium and High
Select the “WIND” function on the control panel. The airflow will oscillate from
left to right as the vertical louvres swing from side to side.
To direct the airflow up or down, the front, horizontal louvres need to be adjusted
manually.
To activate the negative ion generator at the air outlet window, press the
“ANION” button. This will improve the quality of the air being emitted.
Note
Do not use any type of perfume, air fresheners, disinfectants or similar
products in the air-cooler. This appliance is to be used with water ONLY.
TIMER FUNCTION
There are four positions available on the control panel:
1.
0.5H - Half an hour
2.
1H - One hour
3.
2H - Two hours
4.
4H - Four hours
Each time the Timer button is pressed, the time increases in 0.5hr increments up
to a total time of 7.5hr.
The total time selected will be the sum of the time indicated by the lights.
The various times can be selected by pressing the Timer button on the control
panel or by using the remote control.
Your unit will automatically switch off once the chosen time has elapsed.
If no time is selected, the unit will continue operating until switched off.
REMOTE CONTROL
The remote control buttons work the same way as the control panel on the unit.
