DESCRIPTION OF PARTS
1. Cover
2. Large Reamer
3. Small Reamer
4. Strainer
5. Juice Container
6. Sealable Spout
7. Drive Shaft
8. Base
9. Suction Feet
BEFORE FIRST USE
To disassemble see the Care and Cleaning Section. Wash the Cover, Large
and Small Reamers, Strainer and Juice Container in warm soapy water.
Wipe the Base with a damp cloth.
NEVER IMMERSE THE BASE IN WATER
OR ANY OTHER LIQUID.
HOW TO USE
1. Place the juicer on a clean flat, level surface that is easy to clean.
2. The juicer is equipped with Suction Feet which will adhere to any flat and
smooth surface which is free or dust or grease. Slightly moisten the suction
feet before you press them onto the surface.
NOTE:
Suction Feet will not
adhere to textured surfaces.
3. Depending on the size of fruit you are juicing, you can use either the Large
or Small Reamer.
4. If you are juicing small citrus fruit such as lemons or limes, fit the Small
Reamer directly into the drive shaft.
5. If you are juicing larger citrus fruit such as grapefruits or oranges, fit
the Small Reamer onto the drive shaft first, then fit the Large Reamer
over the top of the Small Reamer.
NOTE:
To separate the Reamers, hold
the Large Reamer above the tabs of the Small Reamer, gently squeeze
and pull off.
3
1
2
3
4
5
7
9
8
6
Booklet_Covers_CJ1298_ENG_Salton Booklet 1/31/12 4:01 PM Page 3
