background image

NOTES:

1

IMPORTANT SAFEGUARDS

When using an electrical appliance, basic safety precautions should

always be followed, including the following:
Read all instructions before using the Walkmill.™

DANGER - To reduce the risk of electric shock:

1. Always unplug this appliance from the electrical outlet immediately

after using and before cleaning.

WARNING - To reduce the risk of burns, fire, electric shock or injury

to persons:

1. An appliance should never be left unattended when plugged in.

Unplug from outlet when not in use, and before putting on or
taking off parts.

2. Do not operate under a blanket or pillow. Excessive heating can

occur and cause fire, electric shock, or injury to persons.

3. Close supervision is necessary when this appliance is used by, on, or

near children, invalids, or disabled persons.

4. Use this appliance only for its intended use as described in this

manual. Do not use attachments not recommended by the
manufacturer.

5. Never operate this appliance if it has a damaged cord or plug, if it

is not working properly, if it has been dropped or damaged, or
dropped into water. Return the appliance to a service center for
examination and repair.

6. Do not carry this appliance by its supply cord or use the cord as 

a handle.

7. Keep the cord away from heated surfaces.

8. Never operate the appliance with the air openings blocked. Keep

the air openings free of lint, hair and the like.

9. Never drop or insert any object into any opening.

10. Do not operate where aerosol (spray) products are being used or

where oxygen is being administered.

11.To disconnect, turn all controls to the OFF position, then remove plug

from outlet.

SAVE THESE INSTRUCTIONS

FOR HOUSEHOLD USE ONLY

Summary of Contents for WALKMILL





















Reviews: