background image

11

USING THE ELECTRONIC DISPLAY

The Walkmill's™ Electronic Display allows you to vary and monitor
your workout with immediate feedback on speed, elevation, calories
burned and time elapsed. Designed for ease of use, the large dials allow
you to vary your workouts on the go.

Always stand close enough to the Console so that you can easily reach
the Control Dials.

DISPLAY FUNCTIONS
To scroll between the Display's 5 various settings press the MODE
button until Display shows the desired readout:

SCAN: Automatically scans TIME, SPEED, DISTANCE and CALORIES

burned every 6 seconds.

SPEED: Displays your current speed in miles per hour.There may be a

slight delay from dialing to attaining your desired speed, therefore
be sure to adjust you speed slowly and allow the Walking Belt 1
second or 2 to catch up.

TIMER: Displays the elapsed time of your workout.The Timer will reset

to 0 after 99 minutes and 59 seconds.

CALORIES: Displays the total calories burned during your workout.

Please note that the calorie count is an estimate, to be used as a
reference only.

DISTANCE: Displays total distance in miles you have walked during

your workout.

NOTE: When not in use, the Electronic Display will turn OFF

automatically after 4 minutes.

Speed
Dial

Elevation
Dial

8

ONCE THE WALKMILL™ IS IN THE DESIRED LOCATION,
LOWER THE WALKING  DECK

1. Re-lock all 4 Wheels.

2. Standing behind Walkmill,™firmly grip Walking Deck with your

right hand.

3. With your left hand, pull the Deck Release Knob.

4. Slowly lower the Walking Deck to the ground. DO NOT LET 

IT DROP!

5. To avoid back injury, raise and lower yourself with your legs

whenever raising or lowering the Walking Deck. Do not bend
over at the hips.

NOTE: The Walkmill™ has been designed and engineered for easy

movement throughout the home.The Walkmill™ allows you to
move your workout where you want, whenever you want. However,
it is highly recommended that you utilize professional movers for
transporting the Walkmill™ up or down stairs, or if you feel the
size or weight is beyond your comfort level.

Locking

Wheels

Hand Grips

Deck Release

Knob

Summary of Contents for WALKMILL





















Reviews: