DESCRIPTION OF PARTS
1. Cabinet
2. Removable Wine Racks (4)
3. Fan Cover
4. Ventilation Holes
5. Leveling Legs (4)
6. Door Handle
7. Door Gasket
8. Control Panel:
a. Power
b. Interior Light
c. F / C Temperature Button
d. F / C Indicator
e. LED Display Window
f. Red Wine Indicator
g. White Wine Indicator
h. Raise Temperature
i. Lower Temperature
j. Set Button
INSTALLATION
1. The unit is designed to be free standing only, it should not be recessed or
built-in. CAUTION: Use two or more people to move and install the
appliance. Failure to do so can result in back or other injuries.
2. Remove all exterior and interior packaging material.
3. To ensure that your wine cooler works at the maximum efficiency, follow
the recommended clearances below for proper ventilation:
- sides 5” (12.7 cm)
- back 5” (12.7 cm)
4. Place the Wine Cellar on a flat level surface that is strong enough to
support it when fully loaded.
NOTE:
DO NOT place the appliance in direct sunlight, this could affect the acrylic
coating. DO NOT place the appliance near sources of heat such as a
stove, heater, radiator, dishwasher, microwave oven, toaster, etc.
DO NOT place the appliance in a moist humid area.
5. This Wine Cellar uses superconductor refrigeration technology and is not
designed for storage in hot area like garages, warehouses or outdoors
since it is designed to operate at a maximum of 17°C/30°F below the
ambient temperature.
4
2
3
1
4
a
8.
b
c
d
e g h
i
j
f
6
7
5
Booklet_WC-2091_ENG.qxd:Salton Booklet 7/28/10 4:25 PM Page 4
