background image

ONE-YEAR LIMITED WARRANTY

This Salton, Inc. product warranty extends to the original consumer purchaser of the product.

Warranty Duration: 

This product is warranted to the original consumer purchaser for a

period of one (1) year from the original purchase date. 

Warranty Coverage: 

This product is warranted against defective materials or

workmanship. This warranty is void if the product has been damaged by accident, in
shipment, unreasonable use, misuse, neglect, improper service, commercial use, repairs
by unauthorized personnel or other causes not arising out of defects in materials or
workmanship. This warranty is effective only if the product is purchased and operated in
the USA, and does not extend to any units which have been used in violation of written
instructions furnished by Salton, Inc., or to units which have been altered or modified or
to damage to products or parts thereof which have had the serial number removed,
altered, defaced or rendered illegible. 

Warranty Disclaimers:

This warranty is in lieu of all warranties expressed or implied and

no representative or person is authorized to assume for Salton, Inc. any other liability in
connection with the sale of our products. There shall be no claims for defects or failure of
performance or product failure under any theory of tort, contract or commercial law including,
but not limited to, negligence, gross negligence, strict liability, breach of warranty and breach of
contract.  Some states do not allow the exclusion or limitations of implied warranties or
consequential damages, so the above limitations or exclusions may not apply to you.
Salton, Inc. is not responsible or liable for indirect, special or consequential damages arising out
of or in connections with the use or performance of the product or other damages with respect
to loss of property, or loss of revenues or profit.

Legal Remedies: 

This warranty gives you specific legal rights, and you may also have other

rights that vary from state to state.

Warranty Performance: 

During the above one-year warranty period, a product with a

defect will be either repaired or replaced with a reconditioned comparable unit (at Salton,
Inc.’s option) when the product is returned to the Salton, Inc. facility listed below. The
repaired or replacement product will be in warranty for the balance of the one-year
warranty period and an additional one-month period. No charge will be made for such
repair or replacement. 

Service and Repair

If service is required, you should first call toll-free 1-800-233-9054 

between the hours of 

8:00 am and 5:00 pm Central Standard Time

and ask for 

CONSUMER SERVICE

. Please refer

to Model WT51 when you call.

In-Warranty Service 

for a product covered under the warranty period, no charge is made

for service and return postage. Please return the product insured, packaged with
sufficient protection, and postage and insurance prepaid to the address listed below. Call
for return authorization. 

Out-of- Warranty Service:

There will be charges rendered for repairs made to the product

after the expiration of the aforesaid one (1) year warranty period, after purchaser is
advised appropriately. Include $6.00 (U.S.) for return shipping and handling.
Salton, Inc. cannot assume responsibility for loss or damage during incoming shipment.
For your protection, carefully package the product for shipment and insure it with the
carrier. Be sure to enclose the following items with your unit: any accessories related to
your problem; your full return address and daytime phone number; a note describing the
problem you experienced; 

a copy of your sales receipt or other proof of purchase to

determine warranty status.

C.O.D. shipments cannot be accepted. 

Return the appliance to:  ATTN: Repair Department, Salton, Inc.

708 South Misouri St. Macon,  MO  63552

For more information on Salton, Inc. products, 

visit our website:

http://www.salton-maxim.com, or email us at: salton@saltonusa.com

Printed in China
©2001 Salton, Inc. 

P/N  60624     

Summary of Contents for Wet Tunes WT51BL













Reviews: