towel. Your Waffle Bowl Maker is now ready to use.
2. Plug unit into a 120V AC outlet. The Indicator Light will come on.
3. Close the Cover until the unit is preheated and the Indicator Light
goes out.
4. Open the Cover and pour batter into the bottom bowl, following the
recipe amounts from the recipe section.
5. Close the Cover. Lock the Locking Clip when cooking waffle bowls so
the bowl is formed correctly. NOTE: Please see the directions about
the Locking Clip in the recipes for other type of bowls.
6. Once the bowls are cooked, carefully remove them from the Waffle
Bowl Maker with a silcone spatula or tongs with plastic tips.
NOTE: Never touch the cooking surface with sharp, pointy or metal
objects. This could damage the non-stick surface.
7. To cook additional waffle bowls, etc. , close the Cover until the
Indicator Light goes out. Pour batter then follow steps 3, 4, 5 and 6
above.
NOTE: When cooking dessert type bowls, cookie and brownie, follow
the directions for cooling the cooked bowls in the recipe section.
8. Once you are finished cooking or when cooling the cookie or brownie
bowls, unplug the unit from the wall outlet.
9. IMPORTANT: All parts of the unit, except the handle, will be very hot
during and after cooking. Do not touch any parts of the unit except the
handle until the unit has cooled.
HELPFUL HINTS
1. The Waffle Bowl Maker has a non-stick surface for even baking and
easy cleaning.
2. Waffle bowls can be baked ahead of time. Prepared according to the
recipes and cooled on a rack for approximately 10 minutes. Store in
your freezer for up to 2 weeks. Waffles can be heated by placing in a
heated oven for a few minutes.
CARE AND CLEANING
1. Unplug the Waffle Bowl Maker and allow it to cool.
2. Wipe the Cooking Plates with a cloth dampened with warm soapy
water.
IMPORTANT: DO NOT IMMERSE THE UNIT AND DO NOT RUN
WATER DIRECTLY ONTO THE COOKING PLATES.
3. Dry the Cooking Plates with a cloth or paper towel.
4. Do not use steel wool pads or other abrasive cleansers on the
Cooking Plates as they may damage the non-stick coating.
5. All servicing, other than cleaning, should be performed by an
authorized service representative.
4
