Tel: 886.2.2175 2930 Email: sales@salukitec.com
www.salukitec.com
151
Section 3 Description of Field Strength Menu
1
Frequency menu ([PScan] mode)
Freq
500MHz
Freq
Step Freq
Auto
Man
Freq Track
Off
On
· [Freq]:
Press [Frequency]→ [Freq] and set the frequency with the
number keys on the front panel. Select [GHz], [MHz], [kHz] or
[Hz] in the frequency unit menu, or change the point frequency with
the [↑] or [↓] key or knob.
· [Special note]:
The point frequency setting range is 1MHz to
44.1GHz.
· [Frequency step]:
Press [Frequency]→[Freq Step Auto Man] and
set the point frequency step with the [↑] or [↓] key or knob. The
frequency step should be set as 1MHz in the auto mode.
· [Freq Track Off On]:
Press [Frequency]→[Freq Track Off On] to
enable or disable frequency tracking. When the frequency tracking is
enabled, the instrument is able to automatically track the frequency
of the peak point, and the tracked frequency will be displayed on the
current frequency display zone of the screen.
· [Special note]:
The peak point in frequency tracking refers to the
peak point of the amplitude signal searched within the current
bandwidth range.
